Portable Ozone Meter Installation Specifications

Portable ozone meters are devices specifically designed to measure ozone concentrations. They utilize specialized internal sensors to accurately monitor changes in ozone levels in the environment. So, how much do you know about the installation specifications for portable ozone meters? Below, our editors at Zetron Technology Electronics will provide a detailed introduction from various perspectives.

Portable Ozone Meter Installation Specifications:

During the installation phase, first clearly identify the operating environment in which the portable ozone meter will be installed and carefully verify that the instrument is compatible with the environment. Key factors such as ambient temperature, humidity, and pressure must be considered. These meters typically have fixed operating range requirements, and they must strictly adhere to the environmental conditions specified in the manual to ensure proper operation.

Next, determine the installation location, which requires a thorough understanding of the weight of ozone. The molecular weight of air is approximately 29 (since nitrogen makes up approximately 4/5 of air, with a molecular weight of 28; oxygen makes up approximately 1/5, with a molecular weight of 32). The calculation yields 28 x 4/5 + 32 x 1/5 = 29). If the molecular weight of ozone is greater than 29, the gas tends to sink, so it's recommended to install it between 30 and 60 cm above the ground. If the molecular weight is less than 29, the gas tends to float, so it's recommended to install it higher up in the room.

During the installation process, the installation and wiring of portable ozone detectors also follow strict regulations. The wiring route must be professionally designed by an experienced low-voltage electrical engineer; communication signal cables must use shielded cable to reduce signal interference; electrical connectors must have reliable explosion-proof connections and strictly comply with explosion-proof standards. Calibration of the detector must be performed in accordance with GB12358-2006 to ensure accurate test results.

In short, portable ozone detectors can provide solid technical support for ozone monitoring in environmental protection, industrial production, and other related fields by accurately measuring ozone concentrations and monitoring and recording data in real time, effectively enabling personnel to efficiently and effectively control ozone conditions. This concludes our sharing of the installation specifications for portable ozone monitors. For more information, please leave a message or follow Zetron Technology's official website.